Minikid 2 is a compact rear facing seat with a very tall seat shell. It has a large head support with automatic adjustment and self locking tether straps. It’s approved rear facing 0-25 kg (0-55 lbs) and has passed the ultra strict Swedish Plus Test. The seat has ASIP side impact protection, an improved and redesigned support leg, a larger head support and a fabric which is easier to remove for washing.
Minikid 2 is installed rear facing with seat belt and is one of few seats in the world having passed the ultra strict Swedish Plus Test standard to 25 kg (55 lbs). Minikid 2 is also one of the most compact rear facing seats available despite its very tall seat shell. It will fit nicely in pretty much any car small to large. The seat will usually last to around 5-6 years or 120-125 cm. The ASIP, side impact protection developed by Axkid, is used on side which is closest to the vehicle door for extra protection.
The new head support is slightly thicker than previously for better safety and sleeping comfort. Adjustment of the head support is self-tightening which means harness is always tight. Manual adjustment of the the head support level is also possible with the redesigned lever. Using the tether straps is easy thanks to the automatic locking mechanism. Attach straps to any solid point under front seat and move the seat from side to side. The self locking ALR mechanism will quickly lock the straps tightly for a rock solid installation.
Angle of Minikid is easily adjusted with the metal bar under front of car seat. If you have a car with vehicle seats sloping more than usual then use the optional angle adjuster for more angle. The support leg has been redesigned and length is now easily adjusted from the side. Support leg of Minikid 2 is not only tall but can also be made very short which is helpful when installed the seat in middle rear seat of the car. Removing the cover was previously a bit complicated but this has now been greatly improved. It’s now easily removed and machine washable at 30 degrees.