Axkid Minikid 4 Max in a Tesla Model 3. As usual awesome view in right side mirror with Minikid 3/4/Movekid/4 Pro/4 Max.

Angle around 30-35 degrees and seat is tight against dashboard. It`s very difficult to attach tether straps in all cars by Tesla.

That`s why we always install attachment loops. Today both in front and rear seat so carseat seat can quickly be moved when needed.

Complete tutorial of how to install attachment loops in Tesla coming next week.

#rearfacing #teslamodel3 #axkid #axkidminikid4max

Only ONE can be number ONE. Two Axkid ONE 2 installed in a Toyota RAV4. They only rear facing seat with Isofix and leg space worth bragging about. HUGE!

RAV4 isn`t a large SUV but great leg space for kids and plenty of space up front is possible thanks to the extremely compact size of ONE.

#rearfacing #axkid #axkidone2 #toyotarav4

TinySeats Two installed in a VW ID.4. One of only two seats in the world which can handle 23 kg rear facing with Isofix. And it`s foldable and will handle taaaall kids!

Easy to bring along as carry-on when travelling. Use the optional padded SeatCase and check in the seat.

Needs little space both installed and folded in the trunk or closet. In this car we have huge space up front for a tall adult.

#rearfacing #tinyseats #tinyseatstwo #vwid4

Axkid Minikid 4 Pro installed in a beautiful Lexus RX450. Trying different seats and after much discussion choices are Minikid 4 Pro or 4 Max.

Seats will also be used in a different much smaller car so seat needs to be compact. It also needs to work in front seat with airbag off. Options are then limited.

Minikid 4 Pro selected since it`s more affordable but identical to 4 Max except for the self/locking tether straps and magnets in shoulder pads.

Installing seat right away with 35 degree angle and an Axkid seat protector to keep the awesome leather interior clean. Also tried seat behind driver and it fit fine.

Child is young so no leg space needed for the next few years. Lots of space up front for a tall adult. Very easy to attach tether straps under seat rails.

#rearfacing #axkid #axkidminikid4pro #lexusrx450h

Britax Max-Way Plus installed in a Kia Niro. One of the best rear facing seats ever made. Plustested, light weight, compact and usually last rear facing to around five years or about 120-125 cm.

Todays seat purchased pre-owned a couple of years ago. Then installed correctly and rock solid. Since then moved and re-installed, unfortunately not even close to correct.

Our lifetime support is often very helpful:-) Parent came back and we went through how to install properly.

Angle around 30-35 degrees with good leg space for child. Works nicely in middle rear which means four adults and a child can fit comfortably.

#rearfacing #britaxmaxwayplus #kianiro

Axkid ONE in a Skoda Enyaq. Trying seats to fit a 3.5-year old, two older kids without car seats and two adults. Currently using a BeSafe iZi modular RF A i-Size.

Isofix is preferred but we also try Minikid 4 Pro/Max in middle rear. This is a good option, fitting everyone without having to sit in narrower middle rear.

ONE is incredibly compact and fits behind 185 cm driver with good leg space for child. This car also has Isofix in front seat which is extremely helpful.

Huge leg space for child can be provided and a tall adult easily fits behind. Also very fast to install and ONE provides good view in right mirror.

Final decision is ONE 3 "Arctic Grey Mist" which nicely matches the car.

#rearfacing #axkid #besafeizimodular #axkidone #axkidone3 #skodaenyaq

BeSafe Stretch installed in a Lynk. The car is basically a copy of Volvo XC60 which means attachment loops as standard. Both front and rear. Awesome!

Nice leg space for older child which means less space up front. Can be improved by placing passenger seat in more upright position and less leg space for child.

Installation very easy but just remember to fold out support leg at the very end. Make sure seat belt is without slack, attach tether straps and push down/wiggle the seat and it will be firm. Fold out support leg tightly against floor and seat will be rock solid.

#rearfacing #besafestretch #lynch

Axkid Minikid 4 Max installed in a Tesla Y with airbag off. Angle around 30 degrees for older child and seat solid against dashboard. We also crossed straps behind car seat.

Parents want to occasionally place Minikid in the back so we installed attachment loops in both places.

Minikid 4 Max has self-locking tether straps which makes attachment loops extra helpful. Simply click straps straight into loops and seat will be rock solid after pushing down and wiggling from side to side.

#rearfacing #axkid #axkidminikid4max #teslamodely

Axkid Movekid/Minikid 4 Pro installed in a Volvo V90. Moving seat from front to rear since the little one isn`t so little any longer.

In front seat more angle and easy to install since Volvo has built in attachment loops under dashboard. The loops are quite small so some time is required to thread through.

Around 30 degree angle in rear seat, medium leg space for child and huge leg space up front for a tall adult. Even easier to install since loops are far larger and easier to work with.

#rearfacing #axkid #axkidmovekid #axkidminikid4pro #volvov90

Axkid Minikid 4 Pro installed in a Ford Focus with airbag off. One of many scheduled appointments for trying a new seat. In the backseat already an old BeSafe iZi Plus inherited from a friend.

Parents outside Sweden often believe front seat to be a death trap. In reality the opposite is true. We count front passenger seat with airbag off as the safest place for a rear facing child.

In front seat Axkid Minikid 4 Pro, Minikid 4 Max and Klippan Opti 129 are always best options since right side mirror can be seen. Occasionally other seats will work but it`s unusual.

We try seats in front, middle rear and behind driver. Minikid thankfully works well in all positions and in cars small to large thanks to its very compact size.

Minikid 4 Pro selected and we intsall with 30-35 degree angle and built in angle adjuster in position two. View in right side mirror very good.

As usual super easy to attach tether straps in all cars by Ford. We cross straps behind seat to make installation rock solid.

iZi Plus in back seat quite well installed but we pull up support leg, pull tether straps HARD and then extend support leg again. Seat is now ultra firm.

#rearfacing #axkid #axkidminikid4pro #besafeiziplus #fordfocus

Axkid ONE 2 installed in an awesome Saab 9-5. Superb car but company unfortunately went bankrupt.

Angle around 35 degrees. More leg space could be provided in more upright position.

ONE/ONE 2/ONE 3 are almost identical, same great seat. Most compact rear facing seat available so nice leg space for child and plenty of room up front is usually possible even in smaller cars.

#rearfacing #axkid #axkidone #axkidone2 #axkidone3

Two Britax Max-Way Plus and a Maxi-Cosi Rodifix installed in a VW Passat Alltrack. World class safety on a budget.

No problem fitting three car seats and two adults in most cars. This 5.5-years old is switching from her MW Plus to a high back booster. Young twins will then change from infant seats to rear facing.

Currently we have a used MW Plus behind passenger purchased pre-owned from us 4-5 years ago. Plustested, compact and works well with two or more seats next to each other. Nicely done with rear facing until 5.5 years!

Another pre-owed MW Plus is selected and we install both next to each other. Seat closest to door is moved around 5-10 cm and both have lots of leg space. Very easy to attach tether straps under seat rails.

Oldest child switching to high back booster and we try pre-owned seats with a short cushion. BeSafe iZi Flex, Maxi-Cosi Rodifx Pro and the older Rodifx are tried and all work quite well.

Rodifix selected which is sold 2020 which means around five more years left of use. Actually longer but child will then be in a booster pillow and the twins still in MW Plus.

Tall adult can easily fit behind drivers seat. This is a great and practical solution to maximise space and fit three kids and two adults in a regular car to avoid purchasing a new one.

#rearfacing #britaxmaxwayplus #maxicosirodifix #vwpassat #vwpassatalltrack

Axkid Minikid 4 installed in a Kia Stonic. Young child right now with the baby insert. Also tried without insert and fit was quite good thanks to thicker clothing. High bonus points since seat color is matching the outfit;-)

Angle 35 degrees and as usual super easy to attach tether straps under seat rails in all cars by Kia. Done in 30 seconds and no attachment loops needed.

Good space in front seat even though angle of seat is steep. Ignore base, only there temporarily.

#rearfacing #axkid #axkidminikid4 #kiastonic

Axkid Spinkid installed in a Toyota RAV4. Little guy needs an upgrade from his infant seat and parents are interested in Spinkid which is currently on mega-sale.

Spinkid is almost identical to the upgraded Spinkid 2. The newer model has the same steels bars on sides as ONE 3 and also a slightly different anti-rebound bar. Both features irrelevant.

It`s a nice Plustested seat with swivel function to the side. Like all Isofix seats approved to 105 cm it won`t last the whole rear facing period but parents are aware of this.

As usual super fast installation and the Isofix connectors in Toyota are easy to reach. The car is nowadays very spacious and there is plenty of room in front seat for a tall adult.

#rearfacing #axkid #axkidspinkid #toyotarav4

Axkid Minikid 2 2022/23 installed in front seat of a Peugeot 5008 with airbag off. A successful but very unusual installation. Nice leg space for child AND also seeing right side mirror with this seat is like finding Bigfoot stealing apples in your garden.

We now have some brand new Minikid 2 available for those who want one of the best selling rear facing seats in the past ten years at a bargain.

Minikid 2, Britax Max-Way/Max-Way Plus and BeSafe Stretch are all very popular seats. But usually horrible in front seat with poor view in side mirror.

Not that easy to attach tether straps under seat rails. Start at the back and then slide straps forward to the very front. No loops needed.

We crossed straps behind Minikid and the self adjusting straps on this model are awesome. Spring is tight and will pull tightly. To make installation ultra-tight straps can also be pulled manually. Weltklasse!

Very unusual with nice leg space in front seat unless it`s a Volvo or a premium Audi/BMW/Mercedes.

This car is from 2021 and has three "real" seats in the back with Isofix. Awesome! This has sadly been changed on the latest models, no Isofix in middle rear, which is good info for those with several kids.

#rearfacing #axkid #axkidminikid2 #peugeot5008

Axkid Movekid Pro and Britax Max-Way Plus installed in a Telsa Model Y. Home delivery with installation for a 5-year old who has outgrown MW Plus and needs a new rear facing seat. 2-year old sister is now taking over the older seat.

Installed with 25-30 degree angle and lots of leg space. Huge space still left for tall adult in front passenger seat.

Unfortunately no attachment loops installed. Easy installation would have been no problem had we known. Straps now secured under back of vehicle seat. Works but not a good option since straps need to be released when moving front seat.

Made MW Plus installation far tighter by pullling up support leg and pulling hard on straps. Keep in mind to always extend support leg at the end for best installation.

#rearfacing #britaxmaxwayplus #axkid #axkidminikid4pro #teslamodely